Published at Thursday, November 22nd 2018. by Jennie Peters in Kitchen Table.
It was a pine dining table who turned legs and a pine top, and it has a recycled brush box table top sitting. On top of it. I'm just sizing it up there after having built it, and you can see it now or pimped up and chalk painted with the new top on and in the background you can see the old top leaning up against the wall, and now you can see it with Two new matching bench seats, so the table is recycled and up cycled. I made the top from the recycled brush box turned chair legs and a Block from Hammer smith now, I'm just having to cut them down by 25 mils because these are coffee table legs and they're a little bit too tall for a chair to cut the original tabletop here, which was really nice, select road, clear point no knocks in it anyway.
So I'm reusing it ripping it down and straightening the edge here because when you rip a big piece like that, you end up not being so straight, so I'm straightening it and then going back under the table saw moving some stuff around cuz. My workshops tiny and I'm ripping that down to make the aprons that I need to join the bench seats together and it's working out well because the rest of its gonna be used for another project. Okay, what you're sending you to do here is flattened one face on the joined, I'm going to flip that and whining degrees. That's it there and straighten flatten and square up one edge.
You have the opposite face, I'm just making parallel to the face, so just straightened on the joined, so they are square straight and flat on three sides: replacing one edge, cutting up the final length here on the drops or 10 by 8 piece, a loose tenon joinery 2 in each Royalton leg and stretch Olen connections; first, a strong dust extraction, you name it whatever, but no I shouldn't. This is good enough. I could use pocket screws, but I don't want it to break in about two months. Hence I'm using those tenants now. This is the final step in the milling process: I'm forming the bead to match the existing table and it's a two-step beating.
Any content, trademark’s, or other material that might be found on the swedishbasketball.com website that is not swedishbasketball.com’s property remains the copyright of its respective owner/s. In no way does swedishbasketball.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 swedishbasketball.com. All Rights Reserved.