Published at Saturday, November 24th 2018. by Dolly Clarke in Kitchen Table.
It is already done so we can start with the legs. That is a tube with the two holes coming through the hole on the top of the leg, make sure the holes lined with the holes in the leg. On the top of the cube, there is a small grip, so you can twist it if you push it in wrong and attach two screws to the leg to the holes. Now we can attach the legs. Is it two washers and secure it exactly the same? For the metal bracket, two washers and security, so cute with the key which by care, will provide for you cute key: let's go crazy here, touch it firmly make sure the legs not going to be wobbly and the table is done and start to do.
The chairs. Now we're going to have four chairs, so that is this is going to be the sitting middle panels, the shorter ones going to go at the back. This is the longer ones they're going to go to the front. Each of this panel will have two plugs on each side have sat in panels ready. This is the back panels back middle panels. Each of each of them has got two wooden plaques on each side and a lot of them because we have four chairs. It's three panels. This is the sitting middle panels. They have L shaped plastic, attach them there. We going to attach the sitting part so just slide it in.
There is no screen anything just plugs them in and we can start with the chairs. This is the front one longer panels, and this is the back panels. They are slightly curved and we can attach the other side panel of the chair make sure we find all the holes make it tight, wrap it in and there are the three long screws going through. The side, the chair straight to the middle panel, be gentle here because this will displace soft. So just don't go crazy. There just make sure the head is lying lining up nicely with the side panel and literary stop, of course, make sure the whole panels are tightened properly.
So this is again in a detail. This is the top curved panels on the middle, see the shorter one at the back of the chair and longer one at the front of the chair. These are those plastics which we attach earlier and we put the second panel in finding the right holes pedal in and make sure you tighten up the screws properly, don't go too heavy on it, especially if you use a screwdriver. I do electric one.
This is the sitting part of the chair slide it in making sure that is equal space all around the chair and secure it with the four screws through the triangle-shaped plastic, which we attached earlier, here again, four screws to the plastic straight to the sitting, part of The chair, because - and this is the optimal table from IKEA in the tortures hope you enjoyed
Any content, trademark’s, or other material that might be found on the swedishbasketball.com website that is not swedishbasketball.com’s property remains the copyright of its respective owner/s. In no way does swedishbasketball.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 swedishbasketball.com. All Rights Reserved.